Print Friendly, PDF & Email

 
1) Do we have to inspect forklifts and other industrial powered trucks each day?

Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily.
Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected.”
Thats what  OSHA says in 1910.178(q)(7)
Photo credit.
2) So what does OSHA say to inspect? That is not so clear.
Industrial trucks shall be kept in a clean condition, free of lint, excess oil, and grease. Noncombustible agents should be used for cleaning trucks.Low flash point (below 100°F.) solvents shall not be used. High flash point (at or above 100°F.) solvents may be used. Precautions regarding toxicity, ventilation, and fire hazard shall be consonant with the agent or solvent used.” 1910.178(q)(10)
“[i]f at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe,” it needs to be removed from service per 29 CFR 1910.178(p)(1)” Link to Overby interpetation letter.”
I would look for seat belt and condition per the compliance directive CPL 02-01-028 IX. C.

 

More helpful than the standard!

Art Credit: http://www.stanssafetyposters.co.uk/posterimages/1211992349-forklift.jpg
3) Do you need to have a written record?
Although the standard requires that the examination be conducted, there is no OSHA requirement that the examination be recorded in writing on a checklist such as the one you provided. However, as an employer it is well within your rights to implement additional safety practices that go beyond OSHA’s requirements such as the completion of your written checklist.” Freed letter of interpretation
4) Where can I find the best information on this complicated topic?
Here.
5) Where can I get some training materials to use in my program?
Here is a free downloadable powerpoint program .
Stan’s Safety Posters: http://tinyurl.com/ya4pxzp
FAQ: http://www.osha.gov/html/faq-pit.html
Share

10 thoughts on “5 Questions for ForkLift Inspection Compliance

  1. For your fork lift truck training (in the UK) contact e p training ltd

  2. Brandon says:

    forklift training, inspection, and safety guidelines should be mandatory in every warehouse in the country.

  3. Aurora says:

    WOW just what I was looking for. Came here by searching for forklift Training

  4. Max says:

    Hello, just wanted to tell you, I liked this
    article. It was funny. Keep on posting!

  5. speakingofprecision says:

    Thanks Max.

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>