Today our growth is limited by our inability to acquire skilled workers. In the last recession, we were held back by lack of demand for our customer’s end products. Today, we cannot find the skilled people that we require to operate new high tech equipment that is needed to make the high precision parts we produce. 
Our shops are tackling this issue in a number of ways. Some are setting up internal training programs, some apprenticeships.  Several of our member companies are creating on-site schools to teach skills needed. As an industry we helped to create, and are supporting initiatives like Right Skills Now. Right Skills Now uses National Institute for Metalworking Skills (NIMS) credentials to create the skilled workforce that manufacturers require to remain competitive in today’s global markets.
Claim: The President had this to say about employment and manufacturing:
More than 14 million new jobs; the strongest two years of job growth since the ’90s; an unemployment rate cut in half. Our auto industry just had its best year ever. Manufacturing has created nearly 900,000 new jobs in the past six years. And we’ve done all this while cutting our deficits by almost three-quarters. We’ve launched next-generation manufacturing hubs, and online tools that give an entrepreneur everything he or she needs to start a business in a single day.”
Response: We haven’t won this one yet.
“…there has been a gain of 878,000 jobs since February 2010. But Bureau of Labor Statistics data show that the number of manufacturing jobs is still 230,000 fewer than…in the depths of the recession — and 1.4 million fewer than when the recession began in December 2007. Indeed, the United States only gained 30,000 manufacturing jobs in all of 2015.” – Washington Post
Question: Why do we have a skilled workforce shortage when we are at the lowest labor participation rate in ten years?

Work yet to be done on unemployment...
Work yet to be done on unemployment…

Regulatory Hostility
Tools to set up a business in a single day sounds downright positive. But for those of us actually in business, the federal government is an adversary, not an advocate. And EPA overreach on Waters of the U.S., declaring jurisdiction over 8 million miles of ditches, and retention ponds from the 3.5 million miles initially authorized by Congress, may make that one-day business approval figure a wee bit optimistic.
Other EPA regulations that increase our costs or potentially will reduce our operations include setting ground level ozone limits below those of the natural conditions of our geography. And the EPA Powerplant Rule that will increase our costs of production significantly.
Industry has reduced the number of fatal work industries by 18.8% from 2004- 2014 yet the Department of Labor increasingly acts as enforcement against, rather than a partner with business, as evidenced by these recent actions:

  • Increase penalties by up to 80%;
  • Elimination of employer’s ability to use positive reinforcement to achieve safety goals, thus making safety an us vs them issue.
  • Joint memorandum of Understanding with Department of Justice to prosecute Serious Safety violations as Felonies under Environmental laws;
  • Focus on Employers responsibilities and worker’s rights, rather than an even approach to the s rights and responsibilities of both employers and employees.

We haven’t mentioned the outright hostility of the NLRB to employers, nor any difficulties with compliance with the Affordable Care Act.
Manufacturers find themselves increasingly hamstrung by the latest regulations out of the federal government- 81,611 pages of which were published in the Federal Register in 2015.

@015 federal register Photo Courtesy Sen. Mike Lee
2015 Federal Register Photo Courtesy Sen. Mike Lee

What is the state of manufacturing today?
We are encouraged by short term Employment Momentum.
Positive trend
Positive trend

Our PMPA Monthly Business Trends Employment Sentiment remains solidly positive with 85% of respondents reporting employment prospects to be steady or improving over the next three months.
Yet our Short Term Industrial Production Momentum tells a very different tale.
State of manufacturing Production
State of manufacturing Production

What is the state of Manufacturing?
We’re happy to report that we have great people, improving technologies, and great ideas to put to work.  Preliminary look at the data for the precision machining industry shows that we finished the year up a very modest 1.6 % over 2014. Positive, but modestly so.
We are taking it on ourselves to solve the skilled workforce issue and are reaching out to our communities through events like MFG Day to tell the story of great careers without requiring thousands in college debt.  We support apprenticeships, serve on advisory boards at local vocational schools and community colleges, and continue to do the lion’s share of training in our industry in our shops at our own cost.
While we continue to be challenged by our inability to add skilled talent, it is the increasingly hostile regulatory tone that has the potential to reduce our operations and increases our risk without any substantiated benefits. We are not asking for the elimination of regulatory enforcement in any area. But we do think it would be nice to have agency policies that could be seen to be fair and dealing with both employer and employee responsibilities. Environmental regulations s that recognize the existing natural conditions, rather than set arbitrary limits that Nature itself does not attain. A government that actually is part of the solution to growing our economy, instead of one of the biggest obstacles those of us that are actually doing that growing and hiring and production must face.
We’re here. We’re ready. We’re committed.
What is the state of the Manufacturing Industry?
Positive. Positive but guarded.

“The growth and passion I have seen in in manufacturing education and credentialing in just a short time has been amazing.”
Kathy Looman from the Gene Haas Foundation made the following remarks at the ribbon cutting at the new Gene Haas Education Center at NIMS, the National Institute for Metalworking Skills.Kathy Looman NIMS
“I have over 30 years in machine tool industry, and yet I felt most days like I belonged to a secret society. When I told people what I did for a living in manufacturing, they would ask me “what’s that?” They just had no idea about metalworking, machine tools, or manufacturing. They had no idea what I, as a woman, could possibly be doing in this business.
“I think that this unfamiliarity with manufacturing, with metalworking, with where stuff comes from, this is one of the reasons that the skills gap has occurred.  And why it is a major problem for us today. No one was telling the young people that manufacturing was a viable career opportunity- because no one knew it themselves. And so the perceptions we all know- you know Manufacturing is like that grainy black and white Charlie Chaplin movie- these perceptions are what is in the mind’s eye of students, their parents, and even the unemployed that could find a great career in manufacturing, if only they knew.
“But this isn’t a sad story. Exciting things are happening these days. The past few years, I have been able to take my manufacturing experience and put it to work promoting manufacturing education- the growth and passion I have seen  in just a short time has been amazing. We at the Gene Haas Foundation believe that NIMS- The National Institute for Metalworking Skills- is the glue that is connecting education, industry and workers. By providing a foundation for manufacturing education based on nationally recognized skills credentials, NIMS is also a catalyst that provides assurance to employers, candidates, and skilled workers that the skills that we need in today’s high- tech manufacturing jobs are there in the credentialed employee.
“Haas is doing more than saying “Good Job” and “Carry on” and letting others do this important work.  Just in the last year, Haas has installed about 900 machines in about 200 brand new skills training programs across the country. The country is filled with teachers needing trained.  Exciting things are going on as we are starting- as a country- to recognize the importance of having a skilled workforce for manufacturing and for our economy. So far this year, Gene Haas Foundation has given out 5 million dollars in scholarships to young people who are pursuing manufacturing education. When these young people are employed in manufacturing, our industry, economy, and country will be the better for their choice.
“That is why we are here today to celebrate the grand opening of The Gene Haas Education Center here at NIMS. The Gene Haas Education Center is a physical representation of the importance of what the National Institute of Metalworking Skills means to our industry and our country.  It is the means to create a more competitive and credentialed skilled workforce. For our employees, for our companies, for our industry, for our global competitiveness.
“We have high expectations for The Gene Haas Education Center. We need a globally competitive, credentialed skilled workforce. NIMS will put this to good use to make a difference for all of us in Manufacturing- employers, employees, candidates, and consumers. Because all of us have a stake in solving the skilled workforce issue.”